Vertical Shaping - Facing Side of Job Surface
 |
||||||||
Vertical Shaping - Facing Side of Job Surface
Vertical Shaping - Facing Side of Job Surface - The clapper box is swivelled away from the face of the wort to be cut.
The tool is fed downwards by rotating the down feed screw by hand at the end of return stroke. The feed is about 0.25 mm.
Vertical Shaping
A - Tool feed
B - Work
On the return stroke the tool swings away from the work and gives clearance, which prevents the work from being scored.
Vertical cutting is carried out in order to make grooves, keyways, parting off and squaring up the ends and shoulders.
|
|
||||||||
|
||||||||