Slotter Machines Parts
 |
||||||||
|
Slotter Machines Parts
Slotter Machines Parts -
(i) Bed or Base is up of cast iron. It supports column, table, ram, driving mechanism etc. The top of the bed carries horizontal ways along which the work table can traverse.
| A - Ram with annular adjustment | D - Table rotation | G - Longitudinal feed |
| B - Tool holder | E - Transverse feed | |
| C - Rotating table | F - Drive gear box |
Slotters
| A - Ram carrying cutting tool | E - Change speed levers | I - Handwheel for table longitudinal traverse |
| B - Balance weight for ram | F - Stop and start lever | J - Hand wheel table for table cross traverse |
| C - Flywheel | G - Change feed hand wheel | |
| D - Reverse feed lever | H - Hand wheel for rotating table |
(ii) Table of a slotter holds the workpiece and is adjustable; in longitudinal and cross wise directions. The table can be rotated about its center. Hand wheels H, J and K are provided for rotating the table and for longitudinal and cross traverse.
(iii) Column is the vertical member, made up of cast iron and it houses the driving mechanism. The vertical front face of the column is accurately finished for providing ways along which the ram moves up and down.
(iv)Ram reciprocates vertically up and down. At its bottom, it carries the cutting tool. It is similar to the ram of a shaper; but it is more massive an4 moves vertically, at right angle to the work table, instead of having the horizontal motion of a shaper,
(v) Cross slide can be moved parallel to the face of the column. The circular worktable is mounted on the top of the cross slide.
|
|
|
||||||||
|
||||||||